igmpsnoop:QuerierSt
Shows the IGMP Snoop querier state.
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| addr | mcast:QuerierIp (address:Ip) |
Address | Value must match ipv4 or ipv6 known format |
| descr | pol:Descr |
Description of the specified attribute | |
| lastMbrIntvl | mcast:LastMbrQueryIntvl (scalar:Uint16) |
Last Member Query Interval | RANGE: [1 , 25] DEFAULT: 1 |
| name | pol:ObjName (naming:Name256) |
Object name | MAX SIZE: 64 |
| queryIntvl | mcast:QueryIntvl (scalar:Uint16) |
Query Interval | RANGE: [1 , 18000] DEFAULT: 125 |
| robustFac | mcast:RobustFactor (scalar:UByte) |
Robustness Factor | RANGE: [1 , 7] DEFAULT: 2 |
| rspIntvl | mcast:QueryRspIntvl (scalar:Uint16) |
Response Interval of Querier | RANGE: [1 , 8387] DEFAULT: 10 |
| startQueryCnt | mcast:QueryCnt (scalar:UByte) |
Startup Query Count | RANGE: [0 , 10] |
| startQueryIntvl | mcast:StartQueryIntvl (scalar:Uint16) |
Startup Query Interval | RANGE: [0 , 18000] DEFAULT: 31 |
| timeout | mcast:QuerierTimeout (scalar:Uint16) |
Configures Querier Timeout | RANGE: [1 , 0xffff] DEFAULT: 255 |
| ver | mcast:Ver (scalar:Enum8) |
Version | SELECTION: 0 - unspecified |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| flags | ipmcsnoop:QuerierFlags (scalar:Bitmask8) |
Querier Flags presenting different states | SELECTION: 1 - local |
| if | nw:IfId (base:IfIndex) |
Interface on which querier is present | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |